CIRCUIT DESIGN WA-TBT-03S Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CIRCUIT DESIGN WA-TBT-03S. CIRCUIT DESIGN WA-TBT-03S 13 pages.
OTHER SETTINGS
RF power select (EUP)
Select RF power level.
H – High (10 mW)
L – Low (5 mW)
WA-TX-03S only.
The switch has no effect when using WA-TX-03-R
Ch. not
available LED
Mute level adjustment
This is the received RF
signal level threshold control.
If the RF falls below this
level, the audio output is
muted. The "AF ON" LED will
go out when the audio is
muted.
OG_WA-TB-03S_v10e
"AF ON" LED
Standby Switch (STB / yellow)
Standby disables RF emission and puts
the module into standby.
TX: Module does not go into standby
during power shut off.
AUTO: During power OFF, the module
enters standby initially allowing a more
controlled power down cycle. This avoids
audio spikes heard at the receiver.
CENTER POS.: No function
5
OPERATION GUIDE
Power switch
Rotate to adjust
audio output
volume.
Circuit Design, Inc