CIRCUIT DESIGN WA-TBT-03S Kullanım Kılavuzu - Sayfa 5

Test Ekipmanları CIRCUIT DESIGN WA-TBT-03S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CIRCUIT DESIGN WA-TBT-03S 13 sayfaları.

OTHER SETTINGS

RF power select (EUP)

Select RF power level.

H – High (10 mW)

L – Low (5 mW)

WA-TX-03S only.

The switch has no effect when using WA-TX-03-R

Ch. not

available LED

Mute level adjustment

This is the received RF

signal level threshold control.

If the RF falls below this

level, the audio output is

muted. The "AF ON" LED will

go out when the audio is

muted.

OG_WA-TB-03S_v10e

"AF ON" LED

Standby Switch (STB / yellow)

Standby disables RF emission and puts

the module into standby.

TX: Module does not go into standby

during power shut off.

AUTO: During power OFF, the module

enters standby initially allowing a more

controlled power down cycle. This avoids

audio spikes heard at the receiver.

CENTER POS.: No function

OPERATION GUIDE

Power switch

Rotate to adjust

audio output

volume.

Circuit Design, Inc