Archatrak Street Deck Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Archatrak Street Deck. Archatrak Street Deck 16 pages. One-car streetdeck 6 x 12

Imprimer la page

D E C K I N G

Assembly

Decide ramp location and install ramp brackets with

protruding end as close to sidewalk as possible.

Shift assembled deck closer to sidewalk if necessary.

Use two ramp brackets

1.1

location based on existing holes located on either end

of perimeter beam (see above). Use one hex head bolt

and flange nut

to attach each ramp bracket to the

perimeter beam.

Repeat this step if you have more than one ramp.

Do not attach ramp to brackets until pavers are laid.

Square deck frame by measuring distance between

diagonal corners and shifting frame as necessary until both

measurements are equal.

Use SE pedestals

to elevate StreetDeck perimeter.

Begin on one of the 6' sides. Snap off the 4 spacer tabs

3.1

on pedestal heads to allow underside of frame to sit

flush on pedestal head. Pedestal heights are adjusted

by holding the screw column firmly and rotating the

pedestal base left or right to raise/lower the pedestal.

StreetDeck perimeter height should be level with

sidewalk height so ramp will sit flush on pavers and

sidewalk.

Elevate remainder of perimeter frame towards opposite

3.2

6' side. Place pedestals every 24" and use level along

perimeter frame to check for necessary pedestal height

adjustments. Typically shorter pedestals are necessary

on the street edge, transitioning to incrementally taller

pedestals toward the sidewalk edge.

per ramp. Choose ramp

Sidewalk Edge

Street Edge

Sidewalk Edge

Archatrak Inc.

Decking

Assembly