Archatrak Street Deck Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Archatrak Street Deck. Archatrak Street Deck 16 pages. One-car streetdeck 6 x 12

Imprimer la page

D E C K I N G

Assembly

Attach planter brackets

If StreetDeck does not have planters, you may skip this step and go to step 5.

Using 2 hex head bolts and flange nuts

4.1

planter bracket , attach planter brackets to

perimeter beams and corner plates in pairs per

planter location. Planter

four corners should have curved bottoms facing

the bracket it's paired with. The remaining four

planter brackets should have curved bottoms

facing away from the corners.

Using 2 hex head bolts and flange nuts

4.2

middle bracket

to crossbeam and middle plate.

At all points where the SE pedestals are under deck frame components, place a

rubber pad

directly above on surface of frame.

Rubber pads placed at planter bracket location are

5.1

cut in half, with half going on either side of planter

bracket.

Using a box cutter knife, remove all 4 spacer tabs

5.2

on the four pads located in the corners and pads

cut in half at planter brackets.

All other rubber support pads require

5.3

two tabs to be removed. Cut off tabs

parallel to deck frame perimeter.

and middle bracket

to StreetDeck perimeter frame.

per

brackets in each of the

, attach

Sidewalk Edge

Archatrak Inc.

Decking

Assembly