ayas BTA Series Manuel d'instruction et certificat de garantie - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et certificat de garantie pour {nom_de_la_catégorie} ayas BTA Series. ayas BTA Series 16 pages. Axial fan chimney
Imprimer la page
ASSEMBLY DIAGRAM
• For assembly, a hole suitable for the product holes and dimensions is drilled in the place
to be mounted.
• Axial fans for chimney can be mounted on the wall or glass depending on the usage.
• If it is to be mounted on glass, it is recommended to use a supporting kit.
• Use insulation material during the assembly of the product.
• Connect the product to the mounting channel as shown in the figure.
• Make sure you have connected the power cable correctly as in the electrical diagram.
Connect the device poles with a disconnecting circuit breaker.
• Make sure to install according to the air direction as shown on the labels on the product.
• Make a trial run of the fan, check is there any vibration and error in the product.
•
It sucks air from the engine part of the product and blows it from the front. It should be
mounted in such a way that the engine stays inside to expel the air in your environment,
and the engine should be outside in order to use it to supply air inside.
11