ayas BTA Series Instruction Manual And Warranty Certificate - Page 12

Browse online or download pdf Instruction Manual And Warranty Certificate for Fan ayas BTA Series. ayas BTA Series 16 pages. Axial fan chimney

Print Page

ASSEMBLY DIAGRAM

• For assembly, a hole suitable for the product holes and dimensions is drilled in the place

to be mounted.

• Axial fans for chimney can be mounted on the wall or glass depending on the usage.

• If it is to be mounted on glass, it is recommended to use a supporting kit.

• Use insulation material during the assembly of the product.

• Connect the product to the mounting channel as shown in the figure.

• Make sure you have connected the power cable correctly as in the electrical diagram.

Connect the device poles with a disconnecting circuit breaker.

• Make sure to install according to the air direction as shown on the labels on the product.

• Make a trial run of the fan, check is there any vibration and error in the product.

•

It sucks air from the engine part of the product and blows it from the front. It should be

mounted in such a way that the engine stays inside to expel the air in your environment,

and the engine should be outside in order to use it to supply air inside.