AYC Perla Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AYC Perla. AYC Perla 10 pages.

Imprimer la page

Installation Summary

The installation must comply with all plumbing and electrical codes. A licensed plumber

should complete the plumbing of the spa.

Note: Failure to comply with federal, state or local codes and ordinances will result in

the warranty being considered null and void.

Select a level location where the floor is capable of supporting the weight of an occupied

spa. For the seat back to fully recline, the spa base must be placed a minimum of 16-20

inches from the wall.

Connect the water supply lines with cold and hot inputs.

Connection: Cold

Connect the floor drain connection to the P-trap (if you are using a wall drain you will

need to install a discharge pump).

Connection: P-trap 1½-inch drain pipe

Place the drain plug into the drain from the top (the drain plug may need to be adjusted

so that it forms a tight seal around the drain).

Install the faucet handle by inserting it into the faucet in front with the red and blue

indicator facing up. Then, tighten the lock screw with a small flathead screwdriver.

Attach the sprayer to the sprayer hose (be sure to cut the zip tie around the sprayer

hose).

Plug the power cord into a GFCI outlet.

Specifications

Shipping Dimension & Weight

Net Dimension & Weight

Capacity of Tub

Switch

Power Source

Plumbing Source

Warranty

½ NPT

Hot

½ NPT

Pedicure Spa & Massage Chair

Dedicated 15Amp Wall Outlet Required

Pipeless Jet motor

Discharge Pump (Optional)

Massage System

Hot Water

Cold Water

Drain

1 Year (See Warranty for covered parts)

60"L x 40"W x 48"H

56"L x 23.5"W x 56"H

4.5 Gallons (approximate)

On/Off Air Activated Switch

120V, 0.4 A, 60Hz

115V, 3.2 A. 60Hz

120V, 60Hz

½" (fitting provided)

3/4" or 1 ½ " (See Plumbing Instructions)

250 lbs.

194 lbs.