Crenova MS8233D Instructions d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Crenova MS8233D. Crenova MS8233D 12 pages.

Fig. 1 Exterior view

1. LCD display 2. "MAX" button 3. "BACK LIGHT" button

4. 'HOLD" button 5. "FUNC" button 6. Rotary Switch (Knob)

7. "V/Ω/HZ/uA/mA" input terminal 8. "COM" input terminal

9. "10A" input terminal

3-2. Functional button

Button

FUNC

HOLD

MAX

3-3.

Display indicators

"FUNC" key is the function select key that acts with

trigger. Use the key as switch of DC/AC current,

Diode/Continuity.

Press "HOLD" to enter and exit the hold mode in any

mode. That act with trigger.

This button is act with trigger. Press this button once, the

maximum value is holding (will display 'MAX' symbol

in the LCD).

After pressing the button, A/D will keep working, and

the display value are always updated and kept the

maximum value.

NOTE: The actual gained value is not the peak value.

This button is used to control Backlight. This button is

act with trigger. When press and hold the button over 2

sec, will enable Backlight.

Press the button again , the backlight will turn off.

Function