Cres Cor H138NPSCLCMCQRL Manuel d'utilisation et d'entretien - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Cres Cor H138NPSCLCMCQRL. Cres Cor H138NPSCLCMCQRL 10 pages. Merchandising hot cabinets
Imprimer la page
FL-2371-LC
Holding Cabinet
Rev. 0 (3/13)
Page 4 of 10
HOW TO REVERSE THE DOUBLE DOOR
OPENING:
1. Open the door 180°, lift it up and off. Lay it down
with the outside up.
2. Pop off the hinge covers with a regular
screwdriver.
3. Unscrew the hinges and pull handle and remount
them to the opposite sides of the door (make sure
the hinge pin is down).
4. Remove the cabinet hinges with door stop
brackets. Remove the screws plugging the mating
hinge holes on the opposite side of the cabinet.
5. Lift out and turn the plastic cam in each cabinet
hinge 180°. Use a screwdriver to pop them out,
if necessary (see Figure 1). Mount the hinges
and door stop brackets onto the opposite side of
cabinet (see Figure 2).
6. Put the door back onto the cabinet and adjust/
tighten the hinges as shown on page 6.
HOW TO REVERSE THE SINGLE DOOR
OPENING:
1. Unscrew and remove the latch from the door and
the magnetic strike from the cabinet.
2. Unscrew the hinges from the cabinet body and
remove door.
3. Remove the screws plugging the mating hinge,
latch and strike holes on the opposite sides of the
cabinet body and door.
4. Remount the hinges to the opposite side of the
cabinet and door.
5. Remount the latch and strike to the opposite side
and adjust/tighten the latch as shown on page 5.
MAINTENANCE INSTRUCTIONS
5925 Heisley Road • Mentor, OH 44060-1833
Right Hand Hinge (as shipped)
Note the position of curved dwell on the cam after
turning it 180°
Left Hand Hinge
Figure 1
Figure 2