Cres Cor H138NPSCLCMCQRL 운영 및 유지보수 지침 매뉴얼 - 페이지 4

{카테고리_이름} Cres Cor H138NPSCLCMCQRL에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor H138NPSCLCMCQRL 10 페이지. Merchandising hot cabinets

FL-2371-LC

Holding Cabinet

Rev. 0 (3/13)

Page 4 of 10

HOW TO REVERSE THE DOUBLE DOOR

OPENING:

1. Open the door 180°, lift it up and off. Lay it down

with the outside up.

2. Pop off the hinge covers with a regular

screwdriver.

3. Unscrew the hinges and pull handle and remount

them to the opposite sides of the door (make sure

the hinge pin is down).

4. Remove the cabinet hinges with door stop

brackets. Remove the screws plugging the mating

hinge holes on the opposite side of the cabinet.

5. Lift out and turn the plastic cam in each cabinet

hinge 180°. Use a screwdriver to pop them out,

if necessary (see Figure 1). Mount the hinges

and door stop brackets onto the opposite side of

cabinet (see Figure 2).

6. Put the door back onto the cabinet and adjust/

tighten the hinges as shown on page 6.

HOW TO REVERSE THE SINGLE DOOR

OPENING:

1. Unscrew and remove the latch from the door and

the magnetic strike from the cabinet.

2. Unscrew the hinges from the cabinet body and

remove door.

3. Remove the screws plugging the mating hinge,

latch and strike holes on the opposite sides of the

cabinet body and door.

4. Remount the hinges to the opposite side of the

cabinet and door.

5. Remount the latch and strike to the opposite side

and adjust/tighten the latch as shown on page 5.

MAINTENANCE INSTRUCTIONS

5925 Heisley Road • Mentor, OH 44060-1833

Right Hand Hinge (as shipped)

Note the position of curved dwell on the cam after

turning it 180°

Left Hand Hinge

Figure 1

Figure 2