Cres Cor H138NPSCLCMCQRL 운영 및 유지보수 지침 매뉴얼 - 페이지 2
{카테고리_이름} Cres Cor H138NPSCLCMCQRL에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor H138NPSCLCMCQRL 10 페이지. Merchandising hot cabinets
페이지 인쇄
FL-2371-LC
Holding Cabinet
Rev. 0 (3/13)
Page 2 of 10
INSTALLATION & OPERATION INSTRUCTIONS
ELECTRICAL SPECIFICATIONS:
Model No.
H138NPSCLCMCQRL
POWER LIGHT
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. For shelf installation, see page 9.
4. Place the cabinet in a well-ventilated area.
5. Place cabinet on level floor.
6. Plug cord end into proper wall outlet.
7. See page 4 to reverse the door openings.
FIRST TIME START-UP:
1. Push the POWER switch to "ON", and run the
unit for one hour.
NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
5925 Heisley Road • Mentor, OH 44060-1833
Volts
Watts
120
2000
POWER SWITCH
HOW TO HOLD:
1. Push POWER switch to "ON." POWER LIGHT
2. The control is preset to maintain an average
3. Preheat cabinet for 45 minutes.
4. Put product into cabinet.
NOTE: Proper food holding temperature is
Blower inlet guard must be in place before
operating cabinet.
Amps
Hertz
16.6
60
TEMPERATURE CONTROL
°F
ADJUST
SET
will come on.
temperature of 160°F. Displayed temperatures will
change during loading and unloading of product.
140°F/60°C or higher.
WARNING
WARNING
Phase
NEMA
1
L5-20P
Air is VERY HOT
when door is opened.