Cres Cor H138NPSCLCMCQRL Handleiding voor gebruik en onderhoud - Pagina 2
Blader online of download pdf Handleiding voor gebruik en onderhoud voor {categorie_naam} Cres Cor H138NPSCLCMCQRL. Cres Cor H138NPSCLCMCQRL 10 pagina's. Merchandising hot cabinets
Pagina afdrukken
FL-2371-LC
Holding Cabinet
Rev. 0 (3/13)
Page 2 of 10
INSTALLATION & OPERATION INSTRUCTIONS
ELECTRICAL SPECIFICATIONS:
Model No.
H138NPSCLCMCQRL
POWER LIGHT
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. For shelf installation, see page 9.
4. Place the cabinet in a well-ventilated area.
5. Place cabinet on level floor.
6. Plug cord end into proper wall outlet.
7. See page 4 to reverse the door openings.
FIRST TIME START-UP:
1. Push the POWER switch to "ON", and run the
unit for one hour.
NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
5925 Heisley Road • Mentor, OH 44060-1833
Volts
Watts
120
2000
POWER SWITCH
HOW TO HOLD:
1. Push POWER switch to "ON." POWER LIGHT
2. The control is preset to maintain an average
3. Preheat cabinet for 45 minutes.
4. Put product into cabinet.
NOTE: Proper food holding temperature is
Blower inlet guard must be in place before
operating cabinet.
Amps
Hertz
16.6
60
TEMPERATURE CONTROL
°F
ADJUST
SET
will come on.
temperature of 160°F. Displayed temperatures will
change during loading and unloading of product.
140°F/60°C or higher.
WARNING
WARNING
Phase
NEMA
1
L5-20P
Air is VERY HOT
when door is opened.