Cresco 20S Manuel - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cresco 20S. Cresco 20S 18 pages. Fertilizer and salt spreader
Assembling your Cresco 20
6
Secure the lower linkage (22) in place using the
R pin small as shown.
NOTE
When placing the legs on the hopper, make sure
the two holes on the side of the lower frame
(Item 15) are on the outside. There should be one
hole on the inside.
9
Rotate the hopper body (17) to the position shown.
Place the gear box and impellor (4) in the centre
hole of the hopper body (17), let it rest there. Make
sure the arrow on the gearbox faces forwards. The
arrow should point away from the stand (2).
If at any point you become stuck, please refer to the video instructions-
https://crescospreaders.com/product/spreaders/estate/cresco-20sw
7
Take the two lower frames (15) and attach them
to the hopper body (17) using the M6x60 bolts
(10). SEE NOTE BELOW.
8
Take the stand (item 3) and place it into the
protruding M6x60 bolts (x4) (item 10). Tighten
with the M6 lock nuts (x4) (Item 11).
ASSEMBLING THE WHEELS:
9A
Place one axle bearing (Item 5) into the hole
shown at the bottom of the lower frame (15).
4