Digimerge DPD24W Manuel d'instruction - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Digimerge DPD24W. Digimerge DPD24W 18 pages. Ultra resolution tdn wdr varifocal dome
Imprimer la page
¡á How to Use the Camera
¡Ü AWB : To obtain the optimum state under the current luminance
levels, direct the camera to point toward a sheet of white paper and
press the SET button. If the environment changes, including the light
source, the white balance will require re-adjustment.
¡Ü MANUAL : Select to "fine-tune" the White Balance manually. Set
White Balance first using the ATW or AWB mode. Afterwards switch
to MANUAL mode, fine-tune the White Balance and then press
the SET button.
MANUAL WHITE BALANCE
RED
-18
BLUE
13
PREVIOUS PAGE.
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
¨ç When the color temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
¨è When the ambient illumination of the subject is low.
¨é If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
Ultra Resolution TDN WDR Varifocal Dome
-20
20
-20
20
20
DAY/NIGHT
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
¡Ü AUTO : This camera has an IR Cut-Filter and automatically changes
to the appropraite mode according to lighting levels.To set up the switching
time and switching speed for the AUTO mode press the SET button.
DAY&NIGHT SETUP
TIME DELAY
PREVIOUS PAGE.
¡Ü COLOR : The picture is displayed in color.
¡Ü B/W : The picture is always displayed in black and white.
21
OUTDOOR
MIDDLE
ATW
AUTO..
0
1
20
Ultra Resolution TDN WDR Varifocal Dome