Digimerge DPD24W Manual de instruções - Página 12
Procurar online ou descarregar pdf Manual de instruções para Câmara de segurança Digimerge DPD24W. Digimerge DPD24W 18 páginas. Ultra resolution tdn wdr varifocal dome
Imprimir página
¡á How to Use the Camera
¡Ü AWB : To obtain the optimum state under the current luminance
levels, direct the camera to point toward a sheet of white paper and
press the SET button. If the environment changes, including the light
source, the white balance will require re-adjustment.
¡Ü MANUAL : Select to "fine-tune" the White Balance manually. Set
White Balance first using the ATW or AWB mode. Afterwards switch
to MANUAL mode, fine-tune the White Balance and then press
the SET button.
MANUAL WHITE BALANCE
RED
-18
BLUE
13
PREVIOUS PAGE.
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
¨ç When the color temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
¨è When the ambient illumination of the subject is low.
¨é If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
Ultra Resolution TDN WDR Varifocal Dome
-20
20
-20
20
20
DAY/NIGHT
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
¡Ü AUTO : This camera has an IR Cut-Filter and automatically changes
to the appropraite mode according to lighting levels.To set up the switching
time and switching speed for the AUTO mode press the SET button.
DAY&NIGHT SETUP
TIME DELAY
PREVIOUS PAGE.
¡Ü COLOR : The picture is displayed in color.
¡Ü B/W : The picture is always displayed in black and white.
21
OUTDOOR
MIDDLE
ATW
AUTO..
0
1
20
Ultra Resolution TDN WDR Varifocal Dome