Cisco 400 Series Manuel de configuration - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco 400 Series. Cisco 400 Series 40 pages. Fasthub
10/100 series
Également pour Cisco 400 Series : Manuel de démarrage rapide (8 pages)
Imprimer la page
Section 1: SVP
AP Configuration
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
2. In the navigation pane, click
addresses are assigned to the interfaces.
3. Under
Interface Name
4. Under
DHCP Information
.
Server
5. Repeat this step for the
6. Click the
button and save the changes.
Apply
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
. Verify that the proper IP
Interfaces
click
.
management
, enter the IP address of the
interface.
ap-manager
.
Monitor
Primary DHCP
11