Cisco 400 Series 구성 매뉴얼 - 페이지 11

{카테고리_이름} Cisco 400 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 400 Series 40 페이지. Fasthub 10/100 series
Cisco 400 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄
Cisco 400 Series 구성 매뉴얼
Section 1: SVP

AP Configuration

PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
2. In the navigation pane, click
addresses are assigned to the interfaces.
3. Under
Interface Name
4. Under
DHCP Information
.
Server
5. Repeat this step for the
6. Click the
button and save the changes.
Apply
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
. Verify that the proper IP
Interfaces
click
.
management
, enter the IP address of the
interface.
ap-manager
.
Monitor
Primary DHCP
11