Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

Figure 2

Step 6

Gently lift the CFC daughter card with both hands and remove the CFC daughter card from the module.

Step 7

Place the CFC daughter card on an antistatic mat, antistatic foam pad, or in an antistatic bag.

Proceed to the

Step 8

Removing the DFC3 Daughter Card

This section contains two DFC3 daughter card removal procedures. The first procedure describes how

to remove the DFC3 daughter card from modules that are not equipped with a stiffener bracket. The

second procedure describes how to remove the DFC daughter card from early versions of the

WS-X6748-GE-TX Ethernet module that are equipped with a stiffener bracket.

Only some versions of the WS-X6748-GE-TX Ethernet module are equipped with a stiffener bracket.

Note

78-15893-08

Unseating the CFC Daughter Card Connectors

WS-X5530

"Installing the DFC3B and DFC3C Daughter Cards" section on page

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Removing a CFC or DFC Daughter Card

Heat sinks

23.