Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Kurulum Notu - Sayfa 11

Anahtar Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Beyaz Kitap (19 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Kurulum Notu (18 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

Figure 2

Step 6

Gently lift the CFC daughter card with both hands and remove the CFC daughter card from the module.

Step 7

Place the CFC daughter card on an antistatic mat, antistatic foam pad, or in an antistatic bag.

Proceed to the

Step 8

Removing the DFC3 Daughter Card

This section contains two DFC3 daughter card removal procedures. The first procedure describes how

to remove the DFC3 daughter card from modules that are not equipped with a stiffener bracket. The

second procedure describes how to remove the DFC daughter card from early versions of the

WS-X6748-GE-TX Ethernet module that are equipped with a stiffener bracket.

Only some versions of the WS-X6748-GE-TX Ethernet module are equipped with a stiffener bracket.

Note

78-15893-08

Unseating the CFC Daughter Card Connectors

WS-X5530

"Installing the DFC3B and DFC3C Daughter Cards" section on page

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Removing a CFC or DFC Daughter Card

Heat sinks

23.