Cisco 7000 and 7507 LED Board MAS-7KLED Manuel d'instructions de remplacement - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Cisco 7000 and 7507 LED Board MAS-7KLED. Cisco 7000 and 7507 LED Board MAS-7KLED 21 pages. Front chassis panel and led board and replacement
Également pour Cisco 7000 and 7507 LED Board MAS-7KLED : Manuel (13 pages)
Imprimer la page
LED Board Location and Description
The LED board contains the three LEDs that report system software (normal) and power supply
(upper power and lower power) status through semiopaque panels on the front of the chassis.
Figure 2 shows the three system status indicators.
Figure 2
The LED board is mounted to the backplane on a horizontal plane near the top of the chassis interior
(shown edge-on in Figure 4). The board slides into two brackets mounted to the front of the
backplane, and a connector on the rear of the LED board mates with a connector on the backplane.
Figure 3
LED board
System Status Indicators (Front-Panel LEDs)
LED Board
LED board
spring
LEDs
Backplane connector
LED board
brackets
Board locking
pin
Cisco 7000 and Cisco 7507 LED Board Replacement Instructions
Product Overview
3