Cisco 7000 and 7507 LED Board MAS-7KLED 교체 지침 매뉴얼 - 페이지 3
{카테고리_이름} Cisco 7000 and 7507 LED Board MAS-7KLED에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7000 and 7507 LED Board MAS-7KLED 21 페이지. Front chassis panel and led board and replacement
Cisco 7000 and 7507 LED Board MAS-7KLED에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지)
페이지 인쇄
LED Board Location and Description
The LED board contains the three LEDs that report system software (normal) and power supply
(upper power and lower power) status through semiopaque panels on the front of the chassis.
Figure 2 shows the three system status indicators.
Figure 2
The LED board is mounted to the backplane on a horizontal plane near the top of the chassis interior
(shown edge-on in Figure 4). The board slides into two brackets mounted to the front of the
backplane, and a connector on the rear of the LED board mates with a connector on the backplane.
Figure 3
LED board
System Status Indicators (Front-Panel LEDs)
LED Board
LED board
spring
LEDs
Backplane connector
LED board
brackets
Board locking
pin
Cisco 7000 and Cisco 7507 LED Board Replacement Instructions
Product Overview
3