Cisco 9124 - mds multilayer fabric switch Manuel de configuration - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 pages. Mds 9000 series
Également pour Cisco 9124 - mds multilayer fabric switch : Spécifications (2 pages), Fiche technique (9 pages), Spécifications (3 pages), Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (36 pages), Note de mise à jour (22 pages), Note de mise à jour (3 pages), Note de mise à jour (40 pages), Manuel (16 pages), Manuel d'installation du matériel (36 pages)

Figure 2 IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2), and MDS 9216i switch map

In conjunction with presenting Fibre Channel targets to iSCSI hosts, the IP Storage Services Modules

(IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS 9216i switch present each iSCSI host as

a Fibre Channel host (in transparent mode), that is, as a host bus adapter (HBA) to the Fibre Channel

storage device. The storage device responds to each IP host as if it were a Fibre Channel host connected

to the Fibre Channel network

Fibre Channel SAN

A SAN is a dedicated, centrally managed, secure information infrastructure, which enables any-to-any

interconnection of servers and storage. SANs are built to incorporate the best of both storage and

networking interfaces: fast and efﬁcient communications optimized for movement of large amounts of

data, but with access to a wide range of other servers and storage devices on the network.

The C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), and

MDS 9216i switch are supported on any currently supported HP infrastructure C-Series switch fabric.

This section lists the HP-supported hardware, drivers, and operating systems that are compatible with the

C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS

9216i switch within an iSCSI environment. For further information regarding speciﬁc version and ﬁrmware

information, refer to the C-Series IP Storage Services Module, 14/2 Multiprotocol Services Module, and

MDS 9216i switch support tables, which can be downloaded from the following HP web site:

http://www.hp.com/support/manuals

In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for

the Cisco MDS9216i Multilayer Fabric Switch.

The following HP storage array products are supported by iSCSI initiators connected to the C-Series IP

Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS 9216i switch:

•

RA/MA8000

•

ESA/EMA12000

•

EMA16000

•

EVA3000, EVA5000

•

EVA4000, EVA6000, EVA8000

•

MSA1000, MSA1500

•

VA7100, VA7110, VA7400, VA7410

•

XP48, XP128, XP512, XP1024, XP12000, XP10000