Cisco 9124 - mds multilayer fabric switch Manuale di configurazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49. Mds 9000 series
Anche per Cisco 9124 - mds multilayer fabric switch: Specifiche tecniche (2 pagine), Scheda tecnica (9 pagine), Specifiche tecniche (3 pagine), Nota di rilascio (48 pagine), Nota di rilascio (44 pagine), Nota di rilascio (36 pagine), Nota di rilascio (22 pagine), Nota di rilascio (3 pagine), Nota di rilascio (40 pagine), Manuale (16 pagine), Manuale di installazione dell'hardware (36 pagine)

Figure 2 IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2), and MDS 9216i switch map

In conjunction with presenting Fibre Channel targets to iSCSI hosts, the IP Storage Services Modules

(IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS 9216i switch present each iSCSI host as

a Fibre Channel host (in transparent mode), that is, as a host bus adapter (HBA) to the Fibre Channel

storage device. The storage device responds to each IP host as if it were a Fibre Channel host connected

to the Fibre Channel network

Fibre Channel SAN

A SAN is a dedicated, centrally managed, secure information infrastructure, which enables any-to-any

interconnection of servers and storage. SANs are built to incorporate the best of both storage and

networking interfaces: fast and efﬁcient communications optimized for movement of large amounts of

data, but with access to a wide range of other servers and storage devices on the network.

The C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), and

MDS 9216i switch are supported on any currently supported HP infrastructure C-Series switch fabric.

This section lists the HP-supported hardware, drivers, and operating systems that are compatible with the

C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS

9216i switch within an iSCSI environment. For further information regarding speciﬁc version and ﬁrmware

information, refer to the C-Series IP Storage Services Module, 14/2 Multiprotocol Services Module, and

MDS 9216i switch support tables, which can be downloaded from the following HP web site:

http://www.hp.com/support/manuals

In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for

the Cisco MDS9216i Multilayer Fabric Switch.

The following HP storage array products are supported by iSCSI initiators connected to the C-Series IP

Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2) and MDS 9216i switch:

•

RA/MA8000

•

ESA/EMA12000

•

EMA16000

•

EVA3000, EVA5000

•

EVA4000, EVA6000, EVA8000

•

MSA1000, MSA1500

•

VA7100, VA7110, VA7400, VA7410

•

XP48, XP128, XP512, XP1024, XP12000, XP10000