Cisco 9124 - mds multilayer fabric switch Note de mise à jour - Page 10

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 22 pages. Mds 9000 series
Également pour Cisco 9124 - mds multilayer fabric switch : Spécifications (2 pages), Fiche technique (9 pages), Spécifications (3 pages), Manuel de configuration (49 pages), Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (36 pages), Note de mise à jour (3 pages), Note de mise à jour (40 pages), Manuel (16 pages), Manuel d'installation du matériel (36 pages)

Refer to the Cisco MDS 9000 Family Fabric Manager Switch Configuration Guide to

enable IOD using Device/Fabric Manager.

FABRIC MANAGER & DEVICE MANAGER GUI SETUP

The optional Cisco Fabric/Device Manager GUI (graphical user interface) is a Java application.

The Fabric/Device Manager installation process is based on requirements for installing Java Web

Start. Refer to the Cisco MDS 9000 Fabric Manager Release Notes for system requirements and

installation instructions.

To install Device Manager, use a web browser to make an http:// connection to the IP address of a

C-series switch.

Note:

Device Manager cannot be installed from the MDS 9020.

Starting with SAN-OS 3.2(1a), Fabric Manager is no longer embedded in the SAN-OS software.

Fabric Manager is available from a CD-ROM or provided by HP in the SAN-OS image bundle.

For additional information on how to install Fabric Manager refer to the "Installation of Cisco

MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager

Configuration Guide.

Starting with SAN-OS 3.3(1a), Fabric Manager Update Installer is provided by HP in the SAN-

OS image bundle. The installer allows the user to upgrade an existing system running Fabric

Manager Standalone or Fabric Manager Server without requiring the Management Software and

Documentation CD.

The following is an example of how to upgrade Windows Fabric Manager using the Fabric

Manager Update Installer.

1. Copy the Installer jar file to your Fabric Manager system

2. At the command prompt, locate the directory where the jar file is placed

3. Type the following command:

java.exe –Xmx512m –jar <jar file>

4. Follow the onscreen instructions provided in the Fabric Manager upgrade software

setup wizard

Refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide for additional

installation instructions.

Note:

The MDS 9020 currently runs FabricWare 2.1(3); HP recommends using the latest supported

Fabric/Device Manager when managing this switch via the GUI.

MDS Multilayer Director & Multilayer Fabric Switches Release Notes