Cisco 9124 - mds multilayer fabric switch 릴리스 노트 - 페이지 10

{카테고리_이름} Cisco 9124 - mds multilayer fabric switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9124 - mds multilayer fabric switch 22 페이지. Mds 9000 series
Cisco 9124 - mds multilayer fabric switch에 대해서도 마찬가지입니다: 사양 (2 페이지), 데이터시트 (9 페이지), 사양 (3 페이지), 구성 매뉴얼 (49 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (36 페이지), 릴리스 노트 (3 페이지), 릴리스 노트 (40 페이지), 매뉴얼 (16 페이지), 하드웨어 설치 매뉴얼 (36 페이지)

페이지 인쇄

Cisco 9124 - mds multilayer fabric switch 릴리스 노트

Refer to the Cisco MDS 9000 Family Fabric Manager Switch Configuration Guide to

enable IOD using Device/Fabric Manager.

FABRIC MANAGER & DEVICE MANAGER GUI SETUP

The optional Cisco Fabric/Device Manager GUI (graphical user interface) is a Java application.

The Fabric/Device Manager installation process is based on requirements for installing Java Web

Start. Refer to the Cisco MDS 9000 Fabric Manager Release Notes for system requirements and

installation instructions.

To install Device Manager, use a web browser to make an http:// connection to the IP address of a

C-series switch.

Note:

Device Manager cannot be installed from the MDS 9020.

Starting with SAN-OS 3.2(1a), Fabric Manager is no longer embedded in the SAN-OS software.

Fabric Manager is available from a CD-ROM or provided by HP in the SAN-OS image bundle.

For additional information on how to install Fabric Manager refer to the "Installation of Cisco

MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager

Configuration Guide.

Starting with SAN-OS 3.3(1a), Fabric Manager Update Installer is provided by HP in the SAN-

OS image bundle. The installer allows the user to upgrade an existing system running Fabric

Manager Standalone or Fabric Manager Server without requiring the Management Software and

Documentation CD.

The following is an example of how to upgrade Windows Fabric Manager using the Fabric

Manager Update Installer.

1. Copy the Installer jar file to your Fabric Manager system

2. At the command prompt, locate the directory where the jar file is placed

3. Type the following command:

java.exe –Xmx512m –jar <jar file>

4. Follow the onscreen instructions provided in the Fabric Manager upgrade software

setup wizard

Refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide for additional

installation instructions.

Note:

The MDS 9020 currently runs FabricWare 2.1(3); HP recommends using the latest supported

Fabric/Device Manager when managing this switch via the GUI.

MDS Multilayer Director & Multilayer Fabric Switches Release Notes