Cisco 9134 - MDS Multilayer Fabric Switch Manuel de configuration - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pages. Mds 9000 series
Également pour Cisco 9134 - MDS Multilayer Fabric Switch : Spécifications (3 pages), Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (22 pages), Note de mise à jour (3 pages), Note de mise à jour (40 pages), Notes de mise à jour (10 pages), Manuel (16 pages), Manuel d'installation du matériel (36 pages)

Imprimer la page
Cisco 9134 - MDS Multilayer Fabric Switch Manuel de configuration

Testing connectivity

To test connectivity, issue the ping command from the host (ping the C-Series Fibre Channel switches)
and the switches (ping the server's two IP addresses). If host and switches are able to ping each other's
respective IP addresses you can proceed with the final steps.

Presenting iSCSI hosts as virtual Fibre Channel hosts

After establishing IP connectivity, you must configure the host and switches for iSCSI discovery and login.
Host side: iSCSI Initiator configuration
You must specify the iSCSI targets that the host will access.
1.
Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window
(Figure
25).
Figure 25 iSCSI Initiator Properties window
2.
On the Discovery Tab, click Add under Target Portals.
The Add Target Portal window opens
(Figure
26).
C-Series iSCSI
33