Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding - Pagina 33

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9134 - MDS Multilayer Fabric Switch: Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Release-opmerkingen (10 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Testing connectivity

To test connectivity, issue the ping command from the host (ping the C-Series Fibre Channel switches)

and the switches (ping the server's two IP addresses). If host and switches are able to ping each other's

respective IP addresses you can proceed with the ﬁnal steps.

After establishing IP connectivity, you must conﬁgure the host and switches for iSCSI discovery and login.

Host side: iSCSI Initiator conﬁguration

You must specify the iSCSI targets that the host will access.

Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window

(Figure

25).

Figure 25 iSCSI Initiator Properties window

On the Discovery Tab, click Add under Target Portals.

The Add Target Portal window opens

(Figure

26).

C-Series iSCSI