Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding - Pagina 35

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9134 - MDS Multilayer Fabric Switch: Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Release-opmerkingen (10 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Pagina afdrukken
Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding
Figure 27 Both C-Series switches are target portals
C-Series switch side: configuring transparent-mode static mapping
The iSCSI-enabled C-Series switches have two modes of mapping IP addresses:
•
Transparent-mode dynamic mapping
•
Transparent-mode static mapping
You must enable static mapping for each iSCSI Initiator for persistent LUN mapping from the Fibre
Channel storage controller.
1.
Using the Cisco Device Manager, select IP > iSCSI from the menu bar.
The IP iSCSI window opens
Figure 28 IP iSCSI window
2.
Clear the Discovery Dynamic check box
(Figure
28).
(Figure
29).
C-Series iSCSI
35