Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding - Pagina 37

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9134 - MDS Multilayer Fabric Switch: Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Release-opmerkingen (10 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Figure 31 iSCSI Initiator zoned with an EVA storage port

Virtual targeting

Before the iSCSI Initiator can log in to the storage controller, you must create virtual targets on each

C-Series Fibre Channel switch in the iSCSI window.

Using the Cisco Device Manager, select IP > iSCSI from the Device Manager menu bar.

The IP iSCSI window opens

Click the Targets tab

Figure 32 The Targets tab

Click

Create.

The Create iSCSI Targets window opens

In the Create iSCSI Targets window, enter a name for the iSCSI Name box.

Select the target storage port from the Port WWN list.

Under Initiator Access, select an Initiator. Select All if the list is empty.

Under Advertised Interfaces, select the port connected to the host iSCSI Initiator.

(Figure

28).

(Figure

32).

(Figure

33).

C-Series iSCSI