Cisco 9134 - MDS Multilayer Fabric Switch Manuel de configuration - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pages. Mds 9000 series
Également pour Cisco 9134 - MDS Multilayer Fabric Switch : Spécifications (3 pages), Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (22 pages), Note de mise à jour (3 pages), Note de mise à jour (40 pages), Notes de mise à jour (10 pages), Manuel (16 pages), Manuel d'installation du matériel (36 pages)

Imprimer la page
Cisco 9134 - MDS Multilayer Fabric Switch Manuel de configuration
Figure 31 iSCSI Initiator zoned with an EVA storage port

Virtual targeting

Before the iSCSI Initiator can log in to the storage controller, you must create virtual targets on each
C-Series Fibre Channel switch in the iSCSI window.
1.
Using the Cisco Device Manager, select IP > iSCSI from the Device Manager menu bar.
The IP iSCSI window opens
2.
Click the Targets tab
Figure 32 The Targets tab
3.
Click
Create.
The Create iSCSI Targets window opens
4.
In the Create iSCSI Targets window, enter a name for the iSCSI Name box.
5.
Select the target storage port from the Port WWN list.
6.
Under Initiator Access, select an Initiator. Select All if the list is empty.
7.
Under Advertised Interfaces, select the port connected to the host iSCSI Initiator.
(Figure
28).
(Figure
32).
(Figure
33).
C-Series iSCSI
37