Cisco C-series Nexus 5010 Manuel d'installation du matériel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco C-series Nexus 5010. Cisco C-series Nexus 5010 19 pages. Replacing an i/o module nexus 5000 series
Également pour Cisco C-series Nexus 5010 : Spécifications (3 pages), Fiche technique (23 pages), Note de mise à jour (26 pages), Note de mise à jour (3 pages), Manuel (11 pages)
Imprimer la page
Replacing an I/O Module for a Cisco Nexus 5548 Switch
Figure 4-4
1
Place the removed I/O module on the antistatic surface.
Step 7
On the remaining fan tray in the I/O module, loosen its captive screw so that it is no longer attached to
Step 8
the I/O module.
Pull the fan tray out of the I/O module.
Step 9
You are ready to install a replacement I/O module as explained in the
on page
Installing an I/O Module
To install an I/O module in a Cisco Nexus 5548 chassis, follow these steps:
Align the replacement I/O module to the I/O module slot in the chassis and push the module all the way
Step 1
into the slot so that its two captive screws are aligned to their holes in the chassis.
Tighten both captive screws to the chassis.
Step 2
Install both fan modules into the replacement I/O module (see the
Step 3
page
Cisco Nexus 5000 Series Hardware Installation Guide
4-4
Removing the I/O Module from the Chassis
Pull the handle on the left fan module to completely
remove the I/O module from the chassis.
4-14.
4-14).
Chapter 4
Replacing Components
1
"Installing a Fan Module" section
"Installing a Fan Module" section on