Cisco C-series Nexus 5010 Руководство по установке оборудования - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Переключатель Cisco C-series Nexus 5010. Cisco C-series Nexus 5010 19 страниц. Replacing an i/o module nexus 5000 series
Также для Cisco C-series Nexus 5010: Технические характеристики (3 страниц), Информационный лист (23 страниц), Примечание к выпуску (26 страниц), Примечание к выпуску (3 страниц), Руководство (11 страниц)

Replacing an I/O Module for a Cisco Nexus 5548 Switch

Figure 4-4

Place the removed I/O module on the antistatic surface.

Step 7

On the remaining fan tray in the I/O module, loosen its captive screw so that it is no longer attached to

Step 8

the I/O module.

Pull the fan tray out of the I/O module.

Step 9

You are ready to install a replacement I/O module as explained in the

on page

Installing an I/O Module

To install an I/O module in a Cisco Nexus 5548 chassis, follow these steps:

Align the replacement I/O module to the I/O module slot in the chassis and push the module all the way

Step 1

into the slot so that its two captive screws are aligned to their holes in the chassis.

Tighten both captive screws to the chassis.

Step 2

Install both fan modules into the replacement I/O module (see the

Step 3

page

Cisco Nexus 5000 Series Hardware Installation Guide

4-4

Removing the I/O Module from the Chassis

Pull the handle on the left fan module to completely

remove the I/O module from the chassis.

4-14.

4-14).

Chapter 4

Replacing Components

"Installing a Fan Module" section

"Installing a Fan Module" section on