Cisco Catalyst 2960-CX Manuel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco Catalyst 2960-CX. Cisco Catalyst 2960-CX 24 pages.
Également pour Cisco Catalyst 2960-CX : Aperçu du produit (15 pages)
Imprimer la page
- 1. Table of Contents
- 2. Finding Feature Information
- 3. Prerequisites for Switch Stacks
- 4. Restrictions for Switch Stacks
- 5. Information about Switch Stacks
- 6. How to Configure a Switch Stack
- 7. Troubleshooting the Switch Stack
- 8. Monitoring the Device Stack
- 9. Configuration Examples for Switch Stacks
- 10. Additional References for Switch Stacks
Assigning a Stack Member Number
Step 4
Step 5
What to do next
Use the no stack-mac persistent timer global configuration command to disable the persistent MAC address
feature.
Assigning a Stack Member Number
This optional task is available only from the stack master.
Follow these steps to assign a member number to a stack member:
Procedure
Step 1
Step 2
Managing Switch Stacks
14
Command or Action
end
Example:
Switch(config)# end
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Command or Action
enable
Example:
Switch> enable
configure terminal
Example:
Switch# configure terminal
Managing Switch Stacks
Purpose
If you enter the no stack-mac
Note
persistent timer command after a
new stack master takes over, before
the time expires, the switch stack
moves to the current stack master
MAC address.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the
configuration file.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.