FIBARO FIBEFGSD-002 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} FIBARO FIBEFGSD-002. FIBARO FIBEFGSD-002 9 pages. Smoke sensor
Imprimer la page
2021. 04. 16.
Safety Warning for Batteries
The product contains batteries. Please remove the batteries when the device is not used. Do not mix batteries of different charging level or different brands.
Installation
Basic activation
1. Turn the cover counter-clockwise and open it
2. Remove the battery blocker
3. Install the sensor's cover in desired location
4. Screw the FIBARO Smoke Sensor into the cover
5. Add the device
6. Test FIBARO Smoke Sensor's operation by performing a self-test – press & hold the B-button
7. Test the Z-Wave network range assuring the device is within range
Installation notes
1. Make sure the alarm sound can be easily audible in other rooms in the building.
2. Install the sensor in already decorated, painted rooms.
3. Install the sensor at least 1.5m from air conditioners.
4. Do not install the sensor in direct sunlight. Keep at least 0.5m distance from light sources.
5. Do not install the sensor in places prone to drafts.
6. Do not install the sensor in places with high water vapor condensation, e.g. above stoves, ovens, kettles, etc. The device can not be installed in places
where the temperature exceeds operational values (0°C – 55°C).
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the
devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This
controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Inclusion
Quickly, triple click the B-button, located on Fibaro Smoke Sensors enclosure.
Exclusion
Quickly, triple click the B-button, located on Fibaro Smoke Sensors enclosure.
Product Usage
Visual LED indicator
FIBARO Smoke Sensor is equipped with a LED diode, signalling sensor's operating modes and alarms. In addition the visual indicator may inform of the Z-Wave
network range or exceeding the temperature threshold.
Visual indicator signalling modes:
Indication of alarms
Added device status is signalled by a single green blink while inserting the battery
Removed device status is signalled by a single red blink while inserting the battery
Software update procedure is signalled by blinking in cyan
Successful software update is signalled with glowing in green
Unsuccessful software update is signalled with glowing in red
MENU levels are signalled with glowing in certain colour
FIBARO Smoke Sensor is equipped with the MENU providing direct control over the device.
Press and hold the B-button for at least 3 seconds to enter MENU (visual indicator will glow white).
Release the B-button – visual indicator will start changing colours in the sequence.
Inside MENU, each of the positions will be signalled with a LED colour:
WHITE – entering MENU confirmation
GREEN – sending device state to associated devices
VIOLET – Z-Wave network's range test
YELLOW – device reset
Confirm your choice with the B-button click.
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGSD-002
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGSD-002
2/8