Crestron 4K DigitalMedia DMPS3-4K-150-C Manuel complémentaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Crestron 4K DigitalMedia DMPS3-4K-150-C. Crestron 4K DigitalMedia DMPS3-4K-150-C 20 pages. 3-series digitalmedia presentation system 150
Également pour Crestron 4K DigitalMedia DMPS3-4K-150-C : Extrait du manuel (2 pages), Manuel (2 pages), Extrait du manuel (2 pages)

Physical Description
This section provides information about the connectors, controls, and indicators on the front
and rear panels of the DMPS3-4K-150-C.
Front Panel
The following illustration shows the front panel of the DMPS3-4K-150-C.
DMPS3-4K-150-C Front Panel
COMPUTER: USB Type B female;
USB computer console port;
For setup only
PWR: Bicolor green/amber LED, indicates operating power supplied from ac line
power, turns amber while booting and green when operating
NET: Yellow LED, indicates Cresnet
MSG: Red LED, indicates internal control system has generated an error message
HW-R: Recessed push button for hardware reset, reboots the control system
SW-R: Recessed push button for software reset, restarts the software program
IR IN: Infrared sensor;
IR Frequency: 36 to 38 kHz;
IR Formats: Crestron format, RC5;
Allows control from IR wireless remotes using the Crestron or RC-5 command sets
AUTO INPUT SELECT: Push button and bicolor green/amber LED, selects automatic
switching mode
VGA INPUT SELECT 1-4: Push buttons for manual input selection and corresponding
bicolor green/amber LEDs that indicate the current active input and signal presence at
each corresponding VGA input
HDMI INPUT SELECT 1-4: Push buttons for manual input selection and
corresponding bicolor green/amber LEDs that indicate the current active input and
signal presence at each corresponding HDMI
DM INPUT SELECT 1-2: Push buttons for manual input selection and corresponding
bicolor green/amber LEDs that indicate the current active input and signal presence at
each corresponding DM
VOLUME: Continuous turn rotary encoder, adjusts the analog audio output volume
2 • DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System
®
input
®
bus activity
input
®
Supplemental Guide – DOC. 7724A