Crestron 4K DigitalMedia DMPS3-4K-150-C Manuel complémentaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Crestron 4K DigitalMedia DMPS3-4K-150-C. Crestron 4K DigitalMedia DMPS3-4K-150-C 20 pages. 3-series digitalmedia presentation system 150
Également pour Crestron 4K DigitalMedia DMPS3-4K-150-C : Extrait du manuel (2 pages), Manuel (2 pages), Extrait du manuel (2 pages)
Imprimer la page
Rear Panel
The following illustration shows the rear panel of the DMPS3-4K-150-C.
DMPS3-4K-150-C Rear Panel
VGA IN 1-4: HD15 female;
Analog VGA/RGB/video inputs;
Signal Types: VGA, RGB, component, S-video, or composite;
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms nominal;
Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 2.2k Ohms
NOTE:
an appropriate adapter (not included). However, input sync detection is not provided for
composite or S-video signal types.
AUDIO IN 1-4: 3.5 mm TRS mini phone jacks;
Unbalanced stereo line-level analog audio inputs;
Input Impedance: 32k Ohms unbalanced;
Maximum Input Level: 2.8 Vrms unbalanced
NOTE:
corresponding analog audio input is activated (AUDIO 1 for HDMI 1, AUDIO 2 for
HDMI 2, and so on). The analog audio inputs do not pass audio if the HDMI video input
resolution is higher than 1920 x 1200.
HDMI 1-4: 19-pin Type A HDMI female;
Digital video/audio inputs;
Signal Types: HDMI, DVI, or Dual-Mode DisplayPort
NOTE:
accommodate a DVI signal or Dual-Mode DisplayPort signal. The CBL-HD-DVI interface
cable is sold separately.
Supplemental Guide – DOC. 7724A
The VGA inputs can accept component, composite, and S-video signals using
If an HDMI input is selected but no digital audio signal is detected, the
The HDMI inputs require an appropriate adapter or interface cable to
DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System • 3
2
3
4