Sharp Aquos LC-20B8U Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Aquos LC-20B8U. Sharp Aquos LC-20B8U 45 pages. Sharp operation manual liquid crystal television lc-20b8u
Imprimer la page
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm
coaxial cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal.
• Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/
descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
"A" position on the RF switch (not supplied): You can view all unscrambled channels by using the TV's channel keys.
"B" position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
RF switch (not supplied)
A
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
Plug the AC cord
into the main unit,
and then put it
through the cable
holder.
Wall outlet
A
• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
• Unplug the AC cord from the LCD TV set and wall outlet when LCD TV set is not to be used for a long period of time.
Antenna Connection (Continued)
using the converter's channel keys.
OUT
IN
Cable TV converter/
descrambler
(not supplied)
Power Connection
AC INPUT terminal
(AC 110-240 V)
AC cord
Preparation (Continued)
Two-set
signal
Cable TV line
splitter
(not
supplied)
POWER
9