Sharp CD-DP900H Manuel d'utilisation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-DP900H. Sharp CD-DP900H 40 pages. Mini component system
Également pour Sharp CD-DP900H : Manuel d'utilisation (40 pages)

Imprimer la page

Listening to a CD (CDs) (continued)

CD-DP900H

ENGLISH

Repeat play

All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.

To repeat all tracks on up to 3 discs:

Press the

(

) button twice.

To repeat a desired track:

Perform steps 1 - 4 in the "Programmed play" section and then press the

button twice.

To cancel repeat play:

Press the

(

) button again.

" " will go out.

Random play

The tracks on the disc(s) can be played in random order automatically.

Press the RANDOM button on the remote control to begin random play.

To cancel random play:

Press the

button.

Notes:

If you press the

button during random play, you can move to the track

selected next by the random operation. On the other hand, the

does not allow you to move to the previous track. The beginning of the track being

played will be located.

In random play, the CD player will select and play tracks automatically. (You cannot

select the order of the tracks.)

Caution:

After performing repeat or random play, be sure to press the

wise, the disc(s) will play continuously.

E-15

Programmed play

You can choose up to 32 selections for playback in the order you like.

Whilst in the stop mode, press the

DISC SKIP button to select the de-

sired disc.

Press the

select the desired track.

You can also select a track by pressing the

(

)

Press the MEMORY/SET (MEMORY) button to save the track num-

ber.

When the track is memorised, "MEMORY" will appear.

Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed.

If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.

Press the

To clear the programmed selections:

Press the CLEAR button on the remote control whilst the

"MEMORY" indicator is lit.

Each time the button is pressed, one track will be cleared,

beginning with the last track programmed. When all the

tracks are cleared, "MEMORY" will disappear.

Adding tracks to the programme:

If a programme has been previously stored, the "MEMORY" indicator will be dis-

button

played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the

last track of the original programme.

Notes:

Opening the disc tray automatically cancels the programmed sequence.

Even if you press the ON/STAND-BY button to enter the stand-by mode or change

(CD ) button. Other-

the function from CD to another, the programmed selections will not be cleared.

During programme operation, random play is not possible.

Selected disc number

button to

Selected track number

button on the remote control.

(

) button to start playback.

02/1/9

CD-DP900H(H)_2.fm

Playback order