Sharp CD-DP900H Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-DP900H. Sharp CD-DP900H 40 pages. Mini component system
Également pour Sharp CD-DP900H : Manuel d'utilisation (40 pages)

Imprimer la page

Listening to the radio

Tuning

Press the ON/STAND-BY button to turn the power on.

Press the TUNER (BAND) button repeatedly to select the desired

frequency band (FM or AM).

Press the TUNING/TIME (

) button to tune in to the desired

station.

Manual tuning:

Press the TUNING/TIME button as many times as required to tune in to the de-

sired station.

Auto tuning:

When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will

start automatically and the tuner will stop at the first receivable broadcast station.

Notes:

When radio interference occurs, auto scan tuning may stop automatically at

that point.

Auto scan tuning will skip weak signal stations.

To stop the auto tuning, press the TUNING/TIME button again.

When an RDS (Radio Data System) station is tuned in, the frequency will be displayed

first, and then the RDS indicator will light. Finally, the station name will appear.

Full auto tuning can be achieved for RDS stations "ASPM", see page 25.

To receive an FM stereo transmission:

Press the TUNER (BAND) button to display the "ST" indicator.

" " will appear when an FM broadcast is in stereo.

FM stereo mode indicator

FM stereo receiving indicator

If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST"

indicator. The reception changes to monaural, and the sound becomes clearer.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

02/1/9

CD-DP900H(H)_2.fm

CD-DP900H

ENGLISH

E-16

Sound control (See page 11.)