Sharp Notevision PG-D40W3D Manuel de configuration - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Sharp Notevision PG-D40W3D. Sharp Notevision PG-D40W3D 35 pages. True xga/wxga data projectors
Également pour Sharp Notevision PG-D40W3D : Manuel de l'utilisateur (2 pages), Fiche technique (2 pages), Spécifications (2 pages), Brochure & Specs (2 pages)
Imprimer la page
Controlling the Projector via LAN
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or
adjust the following items:
•
Picture Mode
•
CLR Temp
TM
•
BrilliantColor
•
Progressive
•
DNR
•
Eco + Quiet Mode
•
Resolution Setting
•
Signal Type
•
Video System
•
Dynamic Range
•
Resize
•
Overscan
•
OSD Display
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
You cannot operate this page while the
projector is warming up.
•
For details about each item, refer to the
projector's operation manual.
-18
•
Background
•
Projection Mode
•
OSD Language
•
Auto Sync
•
Auto Power Off
•
Auto Restart
•
System Sound
•
Audio Out
•
Internal Speaker
•
Audio Input
•
RS-232C Speed
•
Fan Mode
•
All Reset
Setting the Security
(Network – Security)
On this screen, you can make settings
relating to security.
Items
User Name
Setting of user name for security
protection.
Password
Setting of password for security
protection.
Accept IP
It is possible to set up to three IP
Address
addresses allowing connection to the
projector.
All IP
No limits are set to IP addresses
Addresses
connecting to the projector.
From only
For security improvement, only an IP
specifi c IP
address set by "Address 1-3" can be
addresses
connected to the projector.
Note
•
User Name and Password can be up to 8
characters.
•
You can input the characters below:
a-z, A-Z, 0-9, -, _
Description