Sharp Notevision PG-D40W3D Setup Manual - Page 18

Browse online or download pdf Setup Manual for Projector Sharp Notevision PG-D40W3D. Sharp Notevision PG-D40W3D 35 pages. True xga/wxga data projectors
Also for Sharp Notevision PG-D40W3D: User Manual (2 pages), Specification Sheet (2 pages), Specifications (2 pages), Brochure & Specs (2 pages)

Sharp Notevision PG-D40W3D Setup Manual
Controlling the Projector via LAN
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or
adjust the following items:
Picture Mode
CLR Temp
TM
BrilliantColor
Progressive
DNR
Eco + Quiet Mode
Resolution Setting
Signal Type
Video System
Dynamic Range
Resize
Overscan
OSD Display
Note
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
You cannot operate this page while the
projector is warming up.
For details about each item, refer to the
projector's operation manual.
-18
Background
Projection Mode
OSD Language
Auto Sync
Auto Power Off
Auto Restart
System Sound
Audio Out
Internal Speaker
Audio Input
RS-232C Speed
Fan Mode
All Reset
Setting the Security
(Network – Security)
On this screen, you can make settings
relating to security.
Items
User Name
Setting of user name for security
protection.
Password
Setting of password for security
protection.
Accept IP
It is possible to set up to three IP
Address
addresses allowing connection to the
projector.
All IP
No limits are set to IP addresses
Addresses
connecting to the projector.
From only
For security improvement, only an IP
specifi c IP
address set by "Address 1-3" can be
addresses
connected to the projector.
Note
User Name and Password can be up to 8
characters.
You can input the characters below:
a-z, A-Z, 0-9, -, _
Description