Shimano DURA-ACE FC-R9100 Manuel du distributeur - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano DURA-ACE FC-R9100. Shimano DURA-ACE FC-R9100 21 pages. Front chainwheel
Également pour Shimano DURA-ACE FC-R9100 : Manuel du distributeur (21 pages)
Imprimer la page
MAINTENANCE
Replacing chainrings
MAINTENANCE
Replacing chainrings
• Gear shifting performance will be reduced if the installation positions of the chainrings are incorrect. Be sure to install the chainrings in the
correct positions.
• Use the correct combination of genuine Shimano bolts, chainrings and crank arm, otherwise the large chainring may become damaged by the
bolts.
Outer side
With the marked side of the largest chainring facing outward, set the largest chainring so
that the chain drop prevention pin is positioned under the crank arm.
(A)
(C)
Inner side
With the marked side of the smallest chainring facing inward, set the smallest chainring so
that the Δ mark or the convex section is positioned under the crank arm.
FC-R9100
(A)
(C)
(D)
(B)
NOTE
(B)
FC-R8000/FC-R7000
(B)
20
(A)
Marking
(B)
Crank arm
(C)
Chain drop prevention pin
(A)
Marking
(B)
Crank arm
(C)
Δ mark
(D)
Convex section
Tightening torque
12 - 16 N·m