Shimano DURA-ACE FC-R9100 딜러 매뉴얼 - 페이지 20
{카테고리_이름} Shimano DURA-ACE FC-R9100에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano DURA-ACE FC-R9100 21 페이지. Front chainwheel
Shimano DURA-ACE FC-R9100에 대해서도 마찬가지입니다: 딜러 매뉴얼 (21 페이지)
페이지 인쇄
MAINTENANCE
Replacing chainrings
MAINTENANCE
Replacing chainrings
• Gear shifting performance will be reduced if the installation positions of the chainrings are incorrect. Be sure to install the chainrings in the
correct positions.
• Use the correct combination of genuine Shimano bolts, chainrings and crank arm, otherwise the large chainring may become damaged by the
bolts.
Outer side
With the marked side of the largest chainring facing outward, set the largest chainring so
that the chain drop prevention pin is positioned under the crank arm.
(A)
(C)
Inner side
With the marked side of the smallest chainring facing inward, set the smallest chainring so
that the Δ mark or the convex section is positioned under the crank arm.
FC-R9100
(A)
(C)
(D)
(B)
NOTE
(B)
FC-R8000/FC-R7000
(B)
20
(A)
Marking
(B)
Crank arm
(C)
Chain drop prevention pin
(A)
Marking
(B)
Crank arm
(C)
Δ mark
(D)
Convex section
Tightening torque
12 - 16 N·m