Shimano ST-5500-CA Manuel d'instructions de service - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de service pour {nom_de_la_catégorie} Shimano ST-5500-CA. Shimano ST-5500-CA 10 pages. Ultegra series shifter
Imprimer la page
4.
Align the stud holes, and then press-fit
the lever stud.
Lever stud
Lever stud set
The correct position is for
the round hollow on the
lever stud to be aligned
with the lever stud set
screw.
5.
Remove the return
spring installation tool
with pliers.
Return spring
installation tool
6.
Tighten the lever stud set
screw until it is even with the
surface of the bracket.
Lastly, install the sensor cap.
Lever stud set screw
Tightening torque:
1 N·m {8 in. lbs.}
Replacing the bracket cover
The tabs on the bracket cover each fit to a matching
slot on the bracket.
Wipe a little rubbing alcohol
inside the bracket cover to
make installation easier.
t
screw
Sensor Cap
2 mm Allen key
R
Note the markings:
R : for right
L : for left
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Jan. 2003 by Shimano Inc. XBC SZK Printed in Japan.