Shimano ST-5500-CA Instrukcja serwisowa - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Akcesoria rowerowe Shimano ST-5500-CA. Shimano ST-5500-CA 10 stron. Ultegra series shifter

Align the stud holes, and then press-fit

the lever stud.

Lever stud

Lever stud set

The correct position is for

the round hollow on the

lever stud to be aligned

with the lever stud set

screw.

Remove the return

spring installation tool

with pliers.

Return spring

installation tool

Tighten the lever stud set

screw until it is even with the

surface of the bracket.

Lastly, install the sensor cap.

Lever stud set screw

Tightening torque:

1 N·m {8 in. lbs.}

Replacing the bracket cover

The tabs on the bracket cover each fit to a matching

slot on the bracket.

Wipe a little rubbing alcohol

inside the bracket cover to

make installation easier.

screw

Sensor Cap

2 mm Allen key

Note the markings:

R : for right

L : for left

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice. (English)