Crestron IRP2 Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Crestron IRP2. Crestron IRP2 12 pages. Ir emitter probe
Également pour Crestron IRP2 : Manuel d'installation (2 pages), Manuel d'installation (2 pages)
Imprimer la page
Crestron IRP2
Infrared Emitter: IRP2
Introduction
The IRP2 is an infrared emitter housed in a plastic shell. The IRP2 shell
emits IR control signals sent to it by a Crestron
shell can be installed directly on the IR sensor window of the controlled
device or at a nearby suitable location. The IRP2 is compatible with
2-Series controllers. It is also compatible with X-Generation controllers
by exchanging the 3.5 mm connector for a 5 mm connector (not supplied).
It is not compatible with the CNMS generation.
Description
The IRP2, shown below, contains an infrared (IR) LED housed in a
miniature, mouse shaped, black, injection molded plastic shell. The IRP2
has a ten-foot (304.8 cm) lead terminated in a two-pin 3.5 mm connector.
Installation Guide - DOC. 8168A
Infrared Emitter
®
control system. The IRP2
Infrared Emitter • 1