Crestron IRP2 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Kontrol Crestron IRP2. Crestron IRP2 12 halaman. Ir emitter probe
Juga untuk Crestron IRP2: Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman)

Halaman Cetak

Crestron IRP2

Infrared Emitter: IRP2

Introduction

The IRP2 is an infrared emitter housed in a plastic shell. The IRP2 shell

emits IR control signals sent to it by a Crestron

shell can be installed directly on the IR sensor window of the controlled

device or at a nearby suitable location. The IRP2 is compatible with

2-Series controllers. It is also compatible with X-Generation controllers

by exchanging the 3.5 mm connector for a 5 mm connector (not supplied).

It is not compatible with the CNMS generation.

Description

The IRP2, shown below, contains an infrared (IR) LED housed in a

miniature, mouse shaped, black, injection molded plastic shell. The IRP2

has a ten-foot (304.8 cm) lead terminated in a two-pin 3.5 mm connector.

Installation Guide - DOC. 8168A

Infrared Emitter

control system. The IRP2

Infrared Emitter • 1