Digital Check SB1000 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Check SB1000. Digital Check SB1000 16 pages. Sb series
Également pour Digital Check SB1000 : Manuel d'installation facile (1 pages)
Imprimer la page
Initial Scanner Image Calibration
Note: Before using your scanner for the first time (and/or using
it on a new PC) you must calibrate the unit.
Performing Initial Scanner Calibration
There are two different ways to calibrate your scanner:
1) Calibrate from Scanners and Cameras under Control Panel
a. Go to: Windows "START" / Control Panel / (Printer and Other
Hardware) Scanners and Cameras and you will see your model listed
here.
b. Right click on your scanner model and a pull down window will appear.
c. Select "Calibrate" option to start this process.
d. Vista users need to right click on the scanner model and go to
"Properties".
e. Insert the calibration target and select "Calibrate" button.
2) From your bundled software application (or your own TWAIN compliant
application)
a. Under the menu toolbar select: File / Select Source (Scanning Source).
b. Choose your scanner model "SB500, 600, 1000".
c. Do not select the "SB500, 600, 1000" at this time.
d. Under the menu toolbar select: File / Acquire Image Data...
e. The TWAIN user interface appears (see image below).
f. Insert the calibration target that came with your scanner then select
"Calibrate".
NOTE: Should you lose or forget the calibration target when traveling, you can simply use any plain
"white" piece of printer paper to perform the calibration. Accept the message to proceed to scanning. (See
below)
9
v061311