Siemens SIMATIC ET 200SP Manuel - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 36 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

4.3

Explanation of the module/channel parameters

Diagnostics, Missing supply voltage L+

Enabling of the diagnostics for missing or insufficient supply voltage L+.

IO redundancy

You can configure two identical modules redundantly. To do so, plug both modules into a

redundant terminal block side by side. You can find additional information on mounting

modules in an IO redundancy configuration in the ET 200SP HA System Manual, section

"Installing", "Installing terminal block".

In IO redundancy mode, the left-hand module is the master and the right-hand module is the

slave.

Both redundant modules measure simultaneously and independently in the process. Both

redundant modules generate diagnostics, alarms and process values.

Diagnostics, Short-circuit to ground

When the digital output is enabled, you can enable diagnostics that report a digital output short

circuit to M.

Diagnostics short-circuit to L+

When the digital output is enabled, you can enable diagnostics that report a digital output short

circuit to L+.

Diagnostics, Wire break

With activated wire break checking, the diagnostics are enabled when the line is from the

actuator is interrupted.

Check for wire break

Enable for wire break check. The I/O module can only detect a wire break if wire-break is

activated.

Channel activated

Specifies whether a channel is activated or deactivated.

Reaction to CPU STOP

Determines the reaction of the digital output to CPU STOP or to failure of communication

between the interface module and CPU.

Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1)

Manual, 05/2017, A5E39265993-AA

4.3 Explanation of the module/channel parameters

Parameters