Siemens SIMATIC ET 200SP Manuel - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 40 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

4.2

Declaration of parameters

Diagnostics: No supply voltage L+

Enabling the diagnostic alarm for missing or insufficient supply voltage L+.

Diagnostics port

This parameter allows the enabling of the diagnostics for the selected port.

The possible diagnostics are dependent on the IO-Link device used. Additional information

about the diagnostic interrupts can be found in the description of the utilized IO-Link device.

Potential group

With the "Potential group" parameter, you specify whether the module is inserted on a light-

colored or dark-colored BaseUnit.

A potential group always starts with an I/O module that is inserted on a light-colored

BaseUnit. All modules inserted to the right of this on dark-colored BaseUnits belong to the

same potential group, because the dark-colored BaseUnits are supplied via the light-colored

BaseUnits.

The potential group ends with a new light-colored BaseUnit or the end of the station.

PortQualifierInformation

This parameter enables the PortQualifierInformation (PQI).

The PQI provides information on the port and IO-Link device status.

Port configuration without P7-PCT

This parameter enables the port configuration without S7-PCT for the module.

Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)

Manual, 10/2017, A5E03856846-AD

Parameters/address space

4.2 Declaration of parameters